Used to locate buried plastic Water Pipes, Gas Pipes and any other non-magnetic utility, Sondes are self-contained transmitters that are used with our cable and pipe locators.

Sondes are typically attached to a Flexrod, pushed along the pipe, and the position of the sonde detected from above ground. The Flexitrace product allows the entire path of the pipe to be located, rather than just the end.  Blockages can be located by pushing until the sonde stops, and then locating that position.

Our comprehensive user guide covers Radiodetection’s range of sondes and associated accessories, including Flexrods and FlexiTraces, which can be used in tracing the paths of pipes, ducts, sewers and drains, and in the precise location of blockages or collapses.  Check the sonde frequency to ensure that it can be detected by your Radiodetection cable and pipe locator or cable avoidance tool.

Radiodetection Sonda estándar

Sonda estándar

Localizable hasta 16' (5 m) y medida de 1,53 x 4,13" (39 x 105 mm). Disponible en 3 frecuencias: 512 Hz, 8 kHz y 33 kHz. Número de pieza: 10/SONDE-STD-XX (XX= 512, 8, 33)
Vista de Producto
Radiodetection Sonda flexible de 512Hz

Sonda flexible de 512Hz

Una sonda de 3 secciones, localizable hasta 19' (6 m) y medida de 0,9 x 18,8"(23 x 478 mm), para mejor flexibilidad alrededor de las esquinas de las tuberías y los conductos. Se suministra con tapa de...
Vista de Producto
Radiodetection Sonda S18 de 33 kHz

Sonda S18 de 33 kHz

Localizable hasta 14.5' (4.5 m) y medida de 0,70" (18 mm) de ancho. La sonda S18 tiene de 3,2" (82 mm) de longitud. Número de pieza: 10/SONDE-S18A-33
Vista de Producto
Radiodetection Flexrod

Flexrod

Varilla de fibra de vidrio que se utiliza para impulsar las sondas de Radiodetection a través de tuberías para rastrear la ruta y localizar bloqueos. Disponible en varios diámetros y longitudes...
Vista de Producto