Transmitter Clamp
Applies a transmitter signal to a specific cable or pipe where direct connection is not possible.
Designed to extend the capabilities of Radiodetection products, accessories available include rechargeable battery packs, sondes, fault-find tools and signal clamps. The individual product listings (for example RD8100 and Cat & Genny) show the accessories designed for those individual products.
Genny Clamp
This clamp is used to apply a Genny signal to a specific cable or pipe. This is particularly useful where direct connection
is not possible, or on live cables when these cannot be
de-energized...
Extension Rod
The 25" (630mm) length, non-conductive, nylon extension rod is used to extend the reach of the locator/transmitter clamp or small stethoscope. Multiple rods can be connected together to extend the...
Transmitter Current Direction (CD) Clamp
This clamp is used to apply a CD or low frequency signal from a transmitter to a cable or pipe. The CD signal is useful for identifying individual utilities in congested areas. This is the only...
Current Direction (CD) Telescopic Stethoscope
This accessory can be connected to a RD8100PDL locator to find and identify individual cables, using the CD signal from a Tx10 transmitter. It uses LEDs and direction arrows to identify current...
Locator CD/CM Clamp
CD/CM (Current Direction and Current Measurement) Clamp. This is used to identify individual utilities in congested areas. It provides positive identification when used with a CD signal and can also...
High Gain Stethoscope
This is used to locate individual utilities when either bundled together or in close proximity and where it is not possible to use a locator. With its small size and flat surface, it is ideal for...
Locator Clamp
This is used with a locator to help identify target utilities in congested areas by sensing the signals from individual utilities. Available in 2" (50mm) or 4" (100mm) diameters.
Part No: 10/RX...
Large Stethoscope
This flexible, 20" (50cm) long, accessory helps to locate and identify individual cables that are bundled together, in a tray or where it is not possible to use a clamp.
Part No: 10/RX-STETHOSCOPE...